Marantz CC4001 Guide de l'utilisateur télécharger pdf (Page 11)

7

ENGLISH

NAMES AND FUNCTIONS

REMOTE CONTROL

ANALOG OUTANALOG OUT

OPTICALCOAXIAL

DIGITAL OUT

R

L

OUT

IN

INT.EXT.

AC IN

FLASHER IN

MODEL NO. CC4001MODEL NO. CC4001

RS

-

232C

A B HCDEFG

REAR PANEL

A EXT./INT. (External/Internal switch)

When this unit is used as a standalone

component, set this switch to the INT. side.

When it is used connected to external

component by a remote connecting cable and

to audio component with a remote sensor that

supports remote controls by Marantz, set this

switch to the EXT. side.

Caution

If the unit is used as standalone and the

switch is set to EXT. position, remote control

unit cannot be used.

B RS-232C External Control Port

A control port for professionals (custom

installers).

C REMOTE CONTROL IN/OUT (input

and output) connectors

When the remote control connectors on the

unit and on a Marantz AV component are

connected using the accessory remote

connecting cables, the components can be

operated as a system by remote control.

• When connecting to a component which is

equipped with remote control connectors,

the unit’s REMOTE CONTROL IN

connector must always be connected to

the REMOTE CONTROL OUT connector

on the other component to be connected.

• When connecting a component which is

not equipped with an infrared remote

sensor, this component must always be

connected to the unit’s REMOTE

CONTROL OUT connector.

D ANALOG OUTPUT connectors

These are the output jacks of the analog audio

signals. The supplied analog connection cord

can be connected to the CD, AUX, or other

connectors on an amplifier. Be sure to connect

the L and R channels correctly to the

corresponding jacks.

Caution

Never connect to the PHONO connector on

the amplifier.

E DIGITAL AUDIO OUT COAXIAL

This jack is to be connected with a recording

device, amplifier, D/A converter, etc that has

coaxial digital input using an optional coaxial

digital cable.

F DIGITAL AUDIO OUT OPTICAL

This jack is to be connected with a recording

device, amplifier, D/A converter, etc that has

optical digital input using an optional square

type optical digital cable.

G Flasher Input jack

A control port for professionals (custom

installers).

This is used to control the unit from other

rooms using keypad, etc.

H AC Inlet

Connect the supplied power cord to this jack

and a household AC power outlet.

CC4001N_01_eng 06.5.17 6:14 PM ページ7

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Commentaires sur ces manuels

Pas de commentaire