Marantz SR5001 Manuel d'utilisateur télécharger pdf (Page 29)

ENGLISH

1 INPUT SETUP (ASSIGNABLE DIGITAL

INPUT AND COMPONENT VIDEO INPUT)

4 digital inputs and 2 component video inputs can be

assigned to a desired source.

Use this menu to select the digital input jack to be

assigned to the input source.

Select “INPUT SETUP” in SETUP MAIN

MENU with 3 or 4 cursor button, and press the

ENTER button.

1-1 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

TV :AUTO : 3 : - : -

DVD :AUTO : 1 : 1 : 1

VCR1:AUTO : - : - : 3

DSS :AUTO : 2 : 2 : 2

AUX1:AUTO : F : - : -

MAIN NEXT EXIT

1-2 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

CD :AUTO : 4 : :

TAPE:AUTO : - : :

CD-R:AUTO : 5 : :

AUX2:AUTO : - : :

MAIN RETURN EXIT

To select the input source and MODE, press

the 3 or 4 cursor buttons.

To select

“DIG”

“HDMI” or “COMP” for the input

jack, press the 1 or 2 cursor buttons.

Select “DIG” for input sources, for automatic

detection of the digital input signal condition.

If there is not a digital signal present, but there

is an analog signal present, the analog signal

will be played.

Select “DIG”, when only a digital signal will be

used.

Select “ANA” for input sources for which

no digital input jacks are used.

To select the vdieo source, select “HDMI” or

“COMP” by pressing the 3 or 4 cursor buttons,

and press the 1 or 2 cursor buttons to select

the vdieo source to be assigned .

After you complete this portion of the set up,

move the cursor to MAIN with the 3 or 4 cursor

buttons and press the ENTER button.

Notes:

• When the TUNER is ﬁ xed to the analog input, you

can not select any digital input.

• When a DTS-LD or DTS-CD is playing, this setup is

not available. This is to avoid noise being generated

from the analog input.

• If “DIG” is selected and a DVD, compact disc or

LD is fast-forwarded during playback, decoded

signals may produce a skipping sound. In such cases,

change the setting to DIGITAL.

2 SPEAKER SETUP

After you have installed the SR4001/SR5001,

connected all the components, and determined the

speaker layout, it is now time to perform the settings

in the Speaker Setup menu for the optimum sound

acoustics for your environment and speaker layout.

Before you perform the following settings, it is

important that you first determine the following

characteristics:

2-1 SPEAKERS SIZE

When setting the speaker size in the SPEAKER

SIZE sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel you

are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting lower

than approx. 100 Hz will be output from the

subwoofer.

If the Subwoofer is set to “NONE” and the front

speakers are set to “LARGE,” then the sound will

be output from both the left and right speakers.

2-1 SPEAKERS SIZE

SUBWOOFER : YES

FRONT L/R : LARGE

CENTER : SMALL

SURROUND L/R : SMALL

SURR.BACK : 2CH

SURR.BACK SIZE : SMALL

LPF/HPF : 100Hz

BASS MIX : BOTH

MAIN NEXT EXIT

Select “SPEAKER SETUP” in SETUP MAIN

MENU with 3 or 4 cursor button, and press the

ENTER button.

To select the each speaker, press the 3 or 4

cursor buttons.

To select the setting of each speaker size,

press the 1 or 2 cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the 3 or 4

cursor buttons and then press the ENTER

button to go to the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting,

then this setting is ﬁ xed to “LARGE.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. BACK

NONE:

Select if no surround back left and right speakers

are connected.

2CH:

Select if the surround back left and right speakers

are connected.

1CH:

Select if the one surround back speaker is

connected.

In this case, the audio signal is emitted form the

Surround back L output terminal.

Notes:

• If “NONE” is selected for the Surround L/R setting,

then this setting is ﬁ xed to “NONE.”

• You can use surround back speaker terminals as

multi room speaker terminals when you use no

surround back speaker. (See page 22)

SURR. BACK SIZE

LARGE:

Select if the surround back speaker is large.

SMALL:

Select if the surround back speaker is small.

Note:

If “NONE” is selected for the Surround L/R setting,

then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the cutoff

frequency for the small speakers used. Select one of

the crossover frequency levels according to the size

of the small speaker connected.

80Hz → 100Hz → 120Hz → 150Hz → 180Hz

Notes:

• If using small front speakers, set a slightly higher

frequency. If using large front speakers, set a slightly

lower frequency.

• If Pure-Direct mode, 7.1CH Input is in use, this

function does not take effect.

BASS MIX

• The bass mix setting is only valid when “LARGE”

is set for the front speakers and “YES” is set for the

subwoofer during stereo playback .

This setting has effect only during playback of

PCM or analog stereo sources.

• When “BOTH” is selected, the low frequencies will

be played through the main L&R, as well as the

sub woofer.

In this playback mode, the low frequency range

expand more uniformly through the room, but

depending on the size and shape of the room,

interference may result in a decrease of the actual

volume of the low frequency range.

• By selecting “MIX”, the low frequencies will play

through the main L&R ONLY.

Note:

LFE signals during playback of Dolby Digital or DTS,

will be played through the sub woofer.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Commentaires sur ces manuels

Pas de commentaire

Marantz SR5001 Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Marantz SR5001