Marantz SR5004 Manuel d'utilisateur télécharger pdf (Page 37)

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS SETUP

ENGLISH

SETUP

4 VIDEO SETUP

Video settings are made as follows.

1. Select “Video Setup” from the Main Menu

with the 3 or 4 cursor buttons and press

the ENTER button.

Video Setup

Video Convert

OSD Information

HDMI Output

HDMI Output Resolution

Component Output

Component I / P Convert

Return

: Up / Down : Enter : Select Exit : Exit

: Enable

: Output1

: Auto

: Main Zone

: Disable

Video Setup

Video Convert

OSD Information

HDMI Output Resolution

Component I / P Convert

Return

: Up / Down : Enter : Select Exit : Exit

: Enable

: Auto

: Disable

SR6004

SR5004

2. Select the desired menu with the 3 or

4 cursor buttons and press the ENTER

button.

• Video Convert

This unit is equipped to convert video signals for

monitor output.

This section explains how to set up conversion for

each type of video input.

1. Select “Video Convert” with the 3 or

4 cursor buttons and press the ENTER

button.

Video Convert

BLU-RAY

DVD

VCR

DSS

CD/CDR

AUX

M-XPort

Return

: Up / Down : Change Enter : Exit : Exit

: Analog & HDMI

2. Select “Function” with the 3 or 4 cursor

buttons and set the video conversion mode

with the 1 or 2 cursor buttons.

Analog&HDMI:

This mode both up-converts and down-converts

analog video signals (Composite Video, S-Video,

Component Video). Furthermore, it up-converts

from analog video signal to HDMI. (It cannot down-

convert from HDMI digital video signals to analog

video signals.)

Analog Only:

This mode both up-converts and down-converts

analog video signals (Composite Video, S-Video,

Component Video). It does not up-convert to

HDMI.

Off:

This mode turns off all conversion features.

Note

• For details on video convert feature, see page

43.

• OSD Information

Select the OSD information function to “Enable” or

“Disable” with the 1 or 2 cursor buttons.

If you select “Enable”, this unit will display the

status of the feature (Volume up/down, input

select, etc..) on the monitor. If you do not desire this

information, select “Disable”.

Note

• OSD information is not output to Monitor Output

of HDMI and Component Video. However, OSD

information is output if the Video Convert function

is used to output Video video signals to Monitor

Out of HDMI and Component Video.

For details, refer to“Video Convert”on page 44.

• HDMI Output (SR6004 only)

This setting is for selecting which output terminal,

HDMI 1 or HDMI 2, to output the signal to. Select the

output destination with the 1 / 2 cursor buttons.

• HDMI Output Resolution

Selects the resolution of the video signal output

from the HDMI terminal of this unit.

Select from the following using the 1 or 2 cursor

buttons.

Auto ↔ Through ↔ 480p/576p ↔ 720p ↔ 1080i

↔ 1080p ↔ Auto ↔ ...

• Component Output (SR6004 only)

This setting is for selecting whether to output the

images for the main zone or the images for the

zone system to the COMPONENT MONITOR OUT

terminal. Select the output destination between

Main Zone and Zone A with the 1 / 2 cursor

buttons.

• Component I/P Convert

Set whether or not to convert 480i/576i signals

to 480p/576p signals when outputting the analog

video input signal input from the VIDEO terminals

or COMPONENT terminals.

Select “Enable” or “Disable.”

Disable: Do not convert

Enable: Convert

Notes

• This setting is enabled only when Video Convert

is set to other than Off.

•

When a monitor is connected to the HDMI MONITOR

OUT terminal, and HDMI RESOLUTION is set to

720p, 1080i, 1080p, or AUTO, the I/P CONVERT for

COMPONENT VIDEO OUTPUT does not function.

After you complete this portion of the setup, move

cursor to “Return” with the 3 or 4 cursor buttons

and press the ENTER button.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Marantz SR5004 Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Marantz SR5004