Marantz SR6001 Manuel d'utilisateur télécharger pdf (Page 50)

ENGLISH

Neo:6 Cinema, Neo:6 Music

This mode decodes 2 channel signals into 6 channel

signals using high-accuracy digital matrix technology.

The DTS Neo:6 decoder has near-discrete properties

in the frequency characteristics of the channels as well

as in channel separation.

According to the signals to be played back, DTS Neo:6

uses either the Neo:6 Cinema mode optimized for

movie playback or the Neo:6 Music mode optimized

for music playback.

Note:

•

The Neo:6 mode is available for 2 channel input

signals which are encoded in Dolby Digital, HDCD

or PCM format.

MULTI CH. (MOVIE, MUSIC)

This mode is used to create a wider, deeper and more

natural soundstage from two channel source material.

This is done by feeding the left channel signal to

both the left front and left surround speakers and the

right channel signal to both the right front and right

surround speakers. Additionally, the center channel

reproduces a mix of the right and left channels.

CIRCLE SURROUND

(CS

-CINEMA, CS

-MUSIC, CS

-MONO)

Circle Surround is designed to enable multichannel

surround sound playback of non-encoded and

multichannel encoded material.

Backward compatibility provides listeners with up to

6.1 channels of surround performance from an entire

collection of music and ﬁ lm, including broadcast,

videotape and stereo recorded music.

Depending on source material, you can select CSII-

Cinema mode, CSII-Music mode or CSII-Mono

mode.

Note:

• The CS II mode is available for 2 channel input

signals which are encoded in Dolby Digital, HDCD

or PCM format.

Dolby Virtual Speaker

Dolby Virtual Speaker technology uses proprietary

technology of Dolby Laboratories to create a virtual

surround sound ﬁ eld using only two speakers for the

front channels, allowing the user to experience sound

as if surround speakers were actually being used.

STEREO

This mode bypasses all surround processing.

In stereo program sources, the left and right channels

play normally when PCM audio or analog stereo is

input.

With Dolby Digital and DTS sources, the 5.1 channels

are converted to two channel stereo. 96 kHz PCM

source material can be played back in stereo mode.

CAUTION

Notes for DTS

•

To connected DVD player, laserdisc player or CD

player needs to support DTS digital output. You

may not be able to play some DTS source signals

from certain CD players and LD players even if you

connect the player to the SR6001 digitally. This

is because the digital signal has been processed

(such as the output level, sampling frequency or

frequency response), and the SR6001 cannot

recognize the signal as DTS data.

• Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

• While signals from a DTS laserdisc or CD are

playing in another surround mode, you cannot

switch to digital input or from digital input to analog

input from the INPUT SETUP in the MAIN MENU

or by pressing the A/D button.

• You can not listen to DTS-encoded software in a

multiroom.

•

The outputs for VCR OUT, TAPE OUT and CD-R

OUT output analog audio signals only. Do not record

from CDs or LDs that support DTS using these

outputs. If you do, the DTS-encoded signal will be

recorded as noise.

Notes or Dolby Digital Surround EX

•

When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to set the

EX/ES mode.

• Note that some Dolby Digital Surround EX-encoded

software does not contain the identiﬁ cation signal.

In this case, set the EX/ES mode manually.

Notes for 96 kHz/192 kHz PCM audio

•

The AUTO, Pure Direct, and Stereo modes can be

used when playing PCM signals with a sampling

frequency of 96/192 kHz (such as from DVD-Video/

Audio discs).

•

Certain DVD player models inhibit digital output. For

details, refer to the player’s operation manual.

•

Some DVD discs feature copy protection. When using

such disc, 96 kHz PCM signal are not output from the

DVD player. For details, refer to the player’s operation

manual.

Notes for HDCD

•

HDCD is effective only through digital input.

•

You may not be able to play some HDCD source

signals from certain CD players if you connect

the player to the SR6001 digitally. This is because

the digital signal has been processed (such as

the output level, sampling frequency or frequency

response) and the SR6001 cannot recognize the

signal as HDCD data.

SR6001N DFU_1_ENG 3_4.indd 46SR6001N DFU_1_ENG 3_4.indd 46 06.12.21 3:11:42 PM06.12.21 3:11:42 PM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Marantz SR6001 Manuel d'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Marantz SR6001