Marantz DR2100 Guide de l'utilisateur télécharger pdf (Page 11)

ENGLISH

H LCD (Liquid Crystal Display) panel

This panel shows information on the status of the unit.

a: RDS indicator

EON: EON indicator

TA: TA indicator

TP: TP indicator

NEWS: NEWS indicator

b: Preset station number and FM broadcast mode indicator, etc.

c: Selected source indicator, etc.

d: Band and frequency indicator (EX. FM 106.50).

e: MHz (kHz) Unit of frequency

I Infrared sensor

The infrared signal from the remote control enters the unit through this

window. To operate the unit with the receiver door closed, point the remote

control infrared signal transmitter toward this window.

J DISPLAY button

Press to change the display for information such as clock time or data in

RDS mode.

Press this button for more than 3 seconds to change the brightness of

the LCD backlight to dimmer or normal,

K TIMER button

Press this button to program and check the timer program. Please refer

to page 14 for timer program operation.

L AMP button

The JOG control can be used in the TUNER, AMP or TIMER modes.

Press to change the mode of JOG control to AMP mode.

5 seconds after the previous JOG operation is finished, the mode of

JOG control will return to AMP mode automatically. You can also use

this button to return to AMP mode immediately. The function of JOG

control in AMP mode is changed as follows:

SOURCE select mode: To select input mode.

BASS control mode: Tone control (Low frequency)

TREBLE control mode: Tone control (High frequency)

The AMP mode is used for tone control (BASS/TREBLE) and to change

also source for JOG control.

M JOG control

The JOG control can be used in the AMP, TUNER and TIMER modes.

Details of operation are as follows:

AMP mode: Source select (Usual setting)

Bass control (AMP button is pressed once)

Treble control (AMP button is pressed twice)

TUNER mode: Frequency scan mode (last operation is memorised)

Preset memory scan mode (last operation is

memorised)

RDS mode selection for PTY SEEK, TP SEEK, TA

SEEK, EON SEEK (last operation is memorised)

TIMER mode: Program and confirm timer setting

For more detail, refer to the respective page.

N VOLUME control

To increase or decrease sound level. To increase the sound level turn

clockwise, and to decrease turn counter-clockwise. Each time the unit is

turned ON, the sound level is indicated first.

O Door OPEN/CLOSE button

To open or close the door, press this button. In SYSTEM mode

(system control switch set to SYSTEM position), the doors of

components which are connected to the REMOTE CONTROL

terminal (DR2100 and DV2100) are controlled simultaneously by the

remote control.

Note:

If the door is opened manually in standby mode, the unit will turn

power ON.

P Front panel door

This door can be operated by door OPEN/CLOSE button.

When the unit is turned into standby mode, this door closes automatically.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Marantz DR2100 Guide de l'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Marantz DR2100