Marantz DV8300 Guide de l'utilisateur Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 188
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
Connecting Up
2
24
En
REMOTE CONTROL
DIGITAL
OUTPUT
VIDEO OUTPUT
R
1
AUDIO OUTPUT
COMPONENT
OUT
R
IN
L
INTERNAL
2
CENTER
1
S1/S2
2
SUB W.
SURR.
L
EXTERNAL
COAXIAL
VIDEO
OPTICAL
Y
C
B
/P
R
/P
C
R
B
FRONT
A/V EUROCONNECTOR
TV
AUX
1
INTERNALEXTERNAL
2
3
Easy Setup
This easy setup is the minimum set of connections you
need to start watching DVD video discs. Both sound and
picture are fed directly to your TV using the supplied
Audio/Video cable. For other possible connections, see
pages 28 and 32.
Connecting Audio/Video cables
Be sure to insert each plug fully for
the best connection. The plugs and
jacks are colour-coded to make
connection easier.
Important
In order to properly ground this player, you must connect at
least one audio or video cable (not including an optical cable)
in addition to the control cable.
Connecting system control cables
By connecting this DVD player to another Marantz audio
component using a supplied System Control cable, you can
remotely operate the components as a single system.
When connecting to component with a remote sensor (such as
the SR8200, SR7200), be sure to connect the REMOTE
CONTROL IN jack of this DVD player to the REMOTE CON-
TROL OUT jack of the component with the remote sensor.
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
When connecting to component which is not equipped with a
remote sensor, be sure to connect the component to the
REMOTE CONTROL OUT jack of this DVD player.
Synchronized power on and off
Connect with the remote control output jack of a component
(such as the SR8200, SR7200) which is compatible with
Marantz remote control system. The remote control allows to
switch the power of this DVD player to “POWER ON and
Standby mode”.
Note
Be sure to leave power switch on the Front panel in the
power mode.
Remote switch
When using this DVD player independently, set this switch to
INTERNAL. When using this DVD player in a system with a
Marantz receiver equipped with a remote sensor, set the switch
to EXTERNAL.
Connect to a composite video
input on your TV using the
supplied yellow video cable.
Plug into a standard AC
wall outlet.
Connect to a pair of stereo audio inputs on
your TV using the supplied Audio/Video
cable.
Downloaded From DvDPlayer-Manual.com Marantz Manuals
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 187 188

Commentaires sur ces manuels

Pas de commentaire