Marantz MCR503 Manuel d'utilisateur télécharger pdf (Page 24)

Getting Started Basic Connections

Advanced ConnectionsAdvanced ConnectionsBasic Operations Advanced Operations TroubleshootingExplanation terms Speciﬁ cations Index

ENGLISH

Advanced connections

This section explains how to connect a iPod and USB memory

device.

For other connections, see the sections below.

n Speaker connections (vpage9)

n Connecting components (vpage10)

n Connecting an antenna (vpage10)

n Connecting the power cord (vpage11)

Audio cable (sold separately)

iPod cable

The wireless receiver connection

The unit allows the RX101 wireless receiver (sold separately) to be

connected.

Connect the RX101 to the M-XPort (Marantz-eXtension Port) of the

unit.

• For the installation and operating procedures, read the operating

instructions that come with the RX101.

RX101

Bluetooth device

Remote control connection

The unit can be controlled using the remote sensor of RX101

connected to the unit. Be sure to set “IR=DISABLE” when controlling

in this way.

NOTE

When making this remote control connection, be sure to set the IR

switch of RX101 that is connected to the unit, to ON.

Setting the remote control

Press <ON/STANDBY> to set the unit to standby

mode.

Press and hold down <2> and then press <ON/

STANDBY>

“IR=ENABLE” or “IR=DISABLE” ﬂ ashes on the display.

Press <ui> to select “IR=DISABLE” and then

press <ENTER>.

To restore original settings, repeat steps 1 – 3, select “IR=ENABLE”

and press <ENTER>.

NOTE

The unit cannot be controlled using the remote controller while

“IR=DISABLE” is set.

Basic Operations

Tuner playback

CT (Clock Time)

Use this to correct the time of the clock on this unit.

q During CT reception, press [MENU] or <MODE> for 3 or more

seconds.

The “AUTO Adj mm:ss” is displayed.

w Press [ENTER/MEMO] or <ENTER> to set.

The “RDS mm:ss” is displayed.

• The time on the set’s internal clock is updated to the currently

displayed “CT” time.

Do not operate any buttons while the time is being updated. If buttons

are operated, CT reception is not possible and the time is not updated.

1.M-CR503N_ENG_4th_0610.indd 191.M-CR503N_ENG_4th_0610.indd 19 2010/06/11 18:24:192010/06/11 18:24:19

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 42 43

Commentaires sur ces manuels

Pas de commentaire

Marantz MCR503 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Marantz MCR503