Marantz SR5004 Manuel d'utilisateur télécharger pdf (Page 28)

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERSSETUP

ENGLISH

SETUP

1-2 7.1CH INPUT SETUP

This menu is for adjusting the speaker levels for 7.1-

channel input sources.

Here you will adjust the volume for each channel so

that they are all heard by the listener at the same

level.

1. Select “7.1ch Input Setup” from the Input

Setup menu with the 3 or 4 cursor buttons

and press the ENTER button.

7.1ch Input Setup

Video-in

Front Left

Center

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Subwoofer

Return

: Last

: 0.0dB

: Up / Down : Change Enter : Exit : Exit

2. Select “Video-in” with the 3 or 4 cursor

buttons.

3. Using the 1 or 2 cursor buttons, select the

video input source to be played through the

MONITOR OUT jack.

The input source is switched by pressing the

1 or 2 cursor buttons as follows;

Last ↔ BLU-RAY ↔ DVD ↔ VCR ↔ DSS

↔ TV ↔ CD/CDR ↔ AUX ↔ M-XPort ↔

Video-off ↔Last ↔...

Notes

• When “Last” is selected, the source is set to the

source selected before the 7.1 ch input menu was

activated.

• When “Video-off” is selected, no signal is emitted

from MONITOR OUT jack.

4. Select desired channel with the 3 or 4

cursor buttons.

5. Using the 1 or 2 cursor buttons, adjust the

volume level of each channel.

Move the cursor to “Return” with the 3, 4, 1, and

2 cursor buttons, and press the ENTER button to go

to the Input Setup menu.

Note

• The volume level can be set between -12 dB and

+12 dB in 0.5 dB increments on all channels

except the subwoofer (SUB W), which can be set

from -18dB to +12 dB in 0.5 dB increments.

1-3 FUNCTION RENAME

Input sources can be registered under any name.

This menu is for renaming input source.

This menu is for renaming function name. Names

can be up to 10 characters long, including spaces.

(Characters are selected from those appearing on

the display.) This name appears on the unit's FL

display and the GUI, but it does not appear in the

GUI Setup menu.

1. Select “Function Rename” from the Input

Setup menu with the 3 or 4 cursor buttons

and press the ENTER button.

Function Rename

Function : BLU-RAY

Rename :

B L

U-RAY

;

(

)

[

]

{

}

Space Backspace Default

Return

: Up / Down : Change Enter : Exit : Exit

2. Select “Function” with the 3 or 4 cursor

buttons.

3. Select an input source with the 1 or 2

cursor buttons.

4. Select “Rename” with the 3 or 4 cursor

buttons.

5. Move the cursor to the character (1st to

10th) to change with the 1 or 2 cursor

buttons.

6. Move the cursor to the character list with

the 4 cursor button. (Move the cursor to the

letter “A” to begin with.)

7. Select a character with the 3, 4, 1, and 2

cursor buttons.

8. Press the ENTER button to enter the

selected letter.

9. Repeat steps 5-8 until the new name is

input.

Space:

Inserts a space at the cursor point of the “Rename”

area.

Backspace:

Deletes the character left of the cursor in the

“Rename” area one character at a time.

Default:

Restores the name in the “Rename” area to the

name in the “Function” area.

Note

• Rename cannot be left blank.

Move the cursor to “Return” with the 3, 4, 1, and

2 cursor buttons and press the ENTER button to go

to the Input Setup menu.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Marantz SR5004 Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Marantz SR5004