Marantz SR5004 Manuel d'utilisateur Page 67
- Page / 96
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
NAMES AND
FUNCTIONS
65
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
ADVANCED
OPERATION
ENGLISH
ADVANCED OPERATION
ZONE SYSTEM
The ZONE System mode allows the same source
or different sources to be heard in two ZONEs other
than where this unit is installed.
To use the ZONE system, connect the audio from
the ZONE OUT A and B AUDIO output terminals to
the ZONE A and B amps.
If a surround back channel speaker or speaker C
(see page 21) are not used in the ZONE where this
unit is installed, the ZONE speaker system can be
used with the amp for the surround back channel.
This unit supports ZONE system functions such
as source selectors, ZONE speaker output, sleep
timers and remote control.
The unit shown in the illustrations is SR6004.
ZONE PLAYBACK USING THE ZONE OUT
TERMINALS
3. 4.
1.
5.
3.
5.
4.
1. Press the ZONE A or B button on the
remote controller.
2. When the ZONE setting mode is engaged,
one of the following screens appears on the
display for 10 seconds.
* Display when ZONE A is selected
ZA DVD -18dB
* Display when ZONE B is selected
ZB DVD(D2)
3. Select the input source using the INPUT
SELECTOR knob on the unit or the function
button on the remote controller.
4. Set the ZONE volume to be used by the
ZONE system to taste either by turning the
VOLUME knob on the unit or by pressing
the VOLUME +/– buttons on the remote
controller.
5. To cancel this function, press the ZONE A
or B button on the remote controller (after
pressing the AMP button on the remote
controller).
“MULTI” indicator on the front panel will
be turned off.
Notes
• In ZONE A, it is impossible to use HDMI or
digital input (optically or coaxially connected)
sources.
In ZONE B, it is possible to use only digital input
(optically and coaxially connected) sources.
• The sleep timer, monaural output and other
features can also be set using the MAIN MENU.
(See page 36)
• The volume for ZONE B cannot be set on the unit.
Control the volume by adjusting it on the amp
connected to ZONE B OUT.
• When component video output is not being used
in the main ZONE, it can be used for ZONE A
instead. Refer to page 35. (SR6004 only)
ZONE PLAYBACK USING THE ZONE
SPEAKER A TERMINALS
This unit allows you to connect another set of
speakers amp and place them in a different ZONE
or separated area for Iistening to music.
3. 4.
1.
5.
3.
5.
4.
1. Press the ZONE SPEAKER (Z.SPKR) button
on the remote controller.
2. When the ZONE SPEAKER setting mode
is engaged, one of the following screens
appears on the display for 10 seconds.
* Display when ZONE SPEAKER A is selected
ZSA DVD -18dB
3. Select the input source using the INPUT
SELECTOR knob on the unit or the function
button on the remote controller.
4. Set the ZONE volume to be used by the
ZONE system to your own preference,
either by turning the VOLUME knob on
the main unit or by pressing the VOLUME
+/– buttons on the remote controller.
5. To cancel this function, press the Z.SPKR
button on the remote controller (after
pressing the AMP button on the remote
controller).
“MULTI” indicator on the front panel will
be turned off.
Notes
• Digital input (optically and coaxially connected)
sources cannot be used for ZONE speaker A.
• The sleep timer, monaural output and other
features can also be set using the MAIN MENU.
(See page 36.)
Notes for ZONE Speaker
• The ZONE Speaker mode can be set for only one
of the ZONE A.
• The ZONE SPEAKER output can be used when
Surround Back Speaker = “None, Zone SPKR”
in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 31)
• “Check! Height or Surr Back Speakers” is
displayed when the ZONE SPEAKER button is
pressed when the Surround Back Speaker is not
set to “None, Zone SPKR” in the SPEAKER
SETUP menu. (See SPEAKER SETUP, page 31)
• The ZONE speaker mode cannot be used at the
same time as the speaker C. When connecting for
ZONE use, set the SPEAKER C selector switch
on the rear panel to OFF.
• When the unit is put in ZONE SPEAKER mode and
ZSP A has been set as the Surround Back or Front
Height Speaker (page 31), the ZONE SPEAKER
function can be turned on automatically simply by
pressing the SOURCE button.
- AV Surround Receiver 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- TABLE OF CONTENTS 3
- FEATURES 4
- Hot surface mark 5
- FL DISPLAY AND INDICATOR 7
- REMOTE CONTROLLER 8
- NAMES AND FUNCTION 10
- ‹4 ‹5 ‹7‹6 10
- REAR PANEL 11
- BASIC CONNECTIONS 12
- CONNECTING SPEAKERS 13
- CONNECTING AUDIO COMPONENTS 14
- CONNECTING VIDEO COMPONENTS 15
- CONNECTING HDMI COMPONENTS 16
- CONNECTING THE ANTENNAS 17
- CONNECTING THE AC POWER 17
- BASIC OPERATION 18
- TUNER OPERATION 19
- REMOTE CONTROLLER OPERATION 20
- ADVANCED CONNECTIONS 21
- CONNECTING FOR ANOTHER ZONE 23
- CONNECTING OTHER EQUIPMENT 24
- MENU SYSTEM 26
- 1 INPUT SETUP 27
- 1-2 7.1CH INPUT SETUP 28
- 1-3 FUNCTION RENAME 28
- 2 SPEAKER SETUP 29
- HOW TO PERFORM AUTO SETUP 30
- (AUDYSSEY MULTEQ 30
- [Example] 31
- ERROR MESSAGES 32
- 2-2 MANUAL SETUP 33
- <SPEAKERS DISTANCE> 34
- <SPEAKERS LEVEL> 34
- 3 SURROUND SETUP 35
- PARAMETER 36
- 3-3 CSII PARAMETER 36
- 3-4 NEO:6 PARAMETER 36
- 4 VIDEO SETUP 37
- 5 PREFERENCE 38
- 5-2 DC TRIGGER SETUP 39
- 6 ACOUSTIC EQ 40
- 6-1 ADJUST USER EQ 41
- 6-2 CHECK AUDYSSEY MULTEQ 41
- AUTO S-DIRECT PURE DIRECT 42
- ADVANCED OPERATION 43
- (PRESET MEMORY) 47
- SATELLITE RADIO OVERVIEW 49
- LISTENING TO XM SATELLITE 49
- SEARCH MODE 51
- PRESET MEMORY 52
- LISTENING TO 53
- SIRIUS SATELLITE RADIO 53
- PARENTAL LOCK 57
- PASWORD 9999 58
- NEW WORD____ 58
- WORD CHANGED 58
- USB Audio 59
- Enter : Exit : 59
- No device-30dB 59
- (STATUSES) 63
- ICON DISPLAYS 63
- OTHERS (USB / iPod) 65
- ZONE SYSTEM 67
- SR6004 REMOTE CONTROLLER 71
- CHECKING THE CODE 72
- RESETTING THE CODE 72
- LEARN MODE 72
- LEARNING PROCEDURE 72
- ERASING PROGRAMMED CODES 73
- MACRO MODE 74
- EXAMPLE 1 75
- EXAMPLE 2 76
- SR5004 REMOTE CONTROLLER 78
- TROUBLESHOOTING 80
- SURROUND 81
- USB (SR6004 ONLY) 83
- FRONT KEY (BUTTON) 84
- LOCK OF THE UNIT 84
- GENERAL MALFUNCTION 84
- XM SATELLITE RADIO 84
- SURROUND MODE 85
- DESCRIPTION 88
- Macrovision 90
- COPYRIGHT 92
- CLEANING OF EQUIPMENT 92
- EXTERNAL SURFACES 92
- TECHNICAL SPECIFICATIONS 92
- SETUP CODES 93
- DIMENSIONS 95
Produits connexes et manuels pour Récepteurs et amplificateurs Marantz SR5004
(91 pages)
(95 pages)
(95 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.080 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels