Marantz DR2100 Guide de l'utilisateur télécharger pdf (Page 15)

ENGLISH

(PUSH ENTER)

MULTI JOG

MEMORY

BAND

TIMER

TUNER

AMP

VOLUME

DISPLAY

PHONES

OPEN/CLOSE

STANDBY

SURROUND

245

ADVANCED OPERATIONS

STATION NAME PRESET

The station name preset function allows the name of each preset

channel to be entered using alphabetic and numeric characters.

Before the station name preset operation, store stations with the

preset memory operation described on the previous page.

The operation procedure is as follows:

1. Tune to the desired preset channel. (It is not available if no station

is preset.)

2. Press and hold the MEMORY G or MEMO button , for more than

3 seconds.

3. The extreme left column of the station name indicator will flash,

indicating character entry ready status.

4. When the JOG control M is turned right or the right cursor button

n is pressed, alphabetic and numeric characters will be displayed

in the following order:

A → B → C ... Z → 1 → 2 → 3 ... 0 → space → ’ → , → / → + → – → A

← Left Right →

5. After selecting the first character to be entered, press the ENTER

button of JOG control M or ENTER button n.The entry in this

column is fixed and the next column starts to flash. Fill all columns,

and make sure all characters are flashing.

Press the ENTER button of JOG control M or ENTER button n to

confirm the entry.

Note:

To finish entering during operation, press the ENTER button for

more than 3 seconds while all characters are blinking.

To confirm the station name, press the ENTER button M/n.

To change the character in the previous column, turn the JOG

control or press the cursor

button n and press the ENTER

button M/n while all characters are blinking.

RECALLING A STATION FROM THE PRESET MEMORY

1. For direct selection, press numeric button.

2. It is possible to select a station by using the 4 ⁄0 or the ¢

button ⁄1 of the remote control, or by turning the JOG control M

left or right on the main unit in PRESET mode. To change the

mode of the JOG control M to PRESET mode, press the TUNER

button E on the main unit until “PRESET” appears in the display.

CLEARING THE PRESET MEMORY

The preset memory contents can be cleared with the following procedure.

1. Recall the preset number to be cleared by the way of the previous

page.

2. Press the MEMORY G or MEMO button ,, press 0 button . on

remote control more than 3 seconds. For example, when you want

to clear preset number 12, “CLEAR 12” is displayed.

COPYING THE PRESET MEMORY

The preset memory can copy to other preset number.

1. Recall the original preset station.

2. Press the MEMORY G or MEMO button ,, and turn the JOG

control M until the desired preset number is displayed, or press

the desired number on the ten keypad ..

3. Press the ENTER button n to complete entry.

RECEPTION OF RDS BROADCASTING

The PS2100 receiver provides the following functions for use with the

RDS (Radio Data System).

PTY (Program Type) Auto Seek

Automatic searching only for stations broadcasting the specified type

(genre) of programs.

RADIO TEXT display

Some RDS stations broadcast RADIO TEXT, which contains

additional information on the station and programme being

broadcasted.

RADIO TEXT information appears as ‘running’ text on the display.

RADIO TEXT is transmitted character-by-character by the radio

station. As a result, it may take some time until the entire text has been

received.

PS (Programme Service name) display

The name of the station being tuned is displayed automatically.

CT (Clock Time) display

The clock time is displayed from the broadcasted data. It is local area

time. This time can be copied to the unit’s clock display. Please refer

to page 16, “CT to CL”.

RDS Display

When a receiver is tuned to an FM station that is transmitting RDS

data, the display will automatically show the station name or RDS

TEXT.

To change the display, press the DISPLAY button J m in TUNER

mode. The display will change as follows:

PS (Programme Service) → RT (Radio Text) → PTY (Programme

Type) → CT (Clock Time) → PS

Note:

To display the clock (not RDS CT), press the AMP and DISPLAY

button in TUNER mode.

When no RDS station is received or the received station does not

broadcast the required data, the display will indicate as follows:

“NO NAME” for PS, “NO TEXT” for RADIO TEXT, “NO CT” for CT.

PTY AUTO SEEK

The PS2100 receiver automatically searches for stations transmitting

any of 29 different programme types. To search for a PTY, follow

these steps:

By remote control

1. Press PTY./.. button ⁄2 on the remote control until “PTY SEEK”

appears on the display. If you press the ENTER button of JOG

control n, the current station’s program type will be displayed

when the RDS data is present, or the currently selected PTY

group will be displayed blinking if no station or the RDS data is

present.

2. To change to a new programme type, turn the JOG control n left

or right until the desired PTY is shown in the display.

3. To select a specified program type, use the ten keypad . on the

remote control by entering the corresponding number in the table

on the following page.

4. Once the desired PTY group or type has been selected, press the

ENTER button of JOG control n while the display is blinking

(approx. 5 seconds). The PTY Auto search will start, and the tuner

will detect all station broadcasting RDS whose PTY information

corresponds to the selected choice.

5. The auto search will stop at a station with the specified PTY. To

advance to the next RDS station, press the ENTER button n

again within 5 seconds.

To cancel this function, turn the JOG control n left or right.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Marantz DR2100 Guide de l'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Marantz DR2100