Marantz DR2100 Guide de l'utilisateur télécharger pdf (Page 17)

ENGLISH

DISPLAY

MEMORY

(PUSH ENTER)

MULTI JOG

(PUSH ENTER)

MULTI JOG

MEMORY

(PUSH ENTER)

MULTI JOG

EON (ENHANCED OTHER NETWORK) SEEK

The EON gives information from the other network of RDS.

Information, such as TA, PTY, etc., can be obtained from other

stations. The PS2100 has a special function for this EON data, as

follows:

[Features of EON function]:

This feature automatically changes source from CD (for example)

to tuner when desired programme (NEWS or TA) is received by the

tuner.

For example, if while listening to a CD, the tuner receives NEWS or

a traffic announcement program, the receiver will change its

source from CD to tuner automatically. When the program is

finished, the receiver’s source will return to CD.

By remote control

1. To change the mode to tuner, press the FM/AM button c, and the

NEWS/TA button ⁄2 among the control buttons.

2. The display indicates “EON SEEK”. Press the ENTER button n.

3. The EON SEEK starts to scan, and will stop scanning when the

tuner receives a station which has EON information. The “EON”

indicator lights up. To advance to the next EON station with an

EON flag, press the ENTER button n again within 5 seconds.

4. After the above procedure, press the NEWS/TA button ⁄2 until the

display shows the desired programme, NEWS or TA.

5. The desired program name lights up in the display (the NEWS or

TA segments).

6. Change to the source you desire, for example CD, and play a CD.

7. The source will change automatically to tuner when the desired

programme for EON information is detected. The NEWS or TA

indicator blinks at this time. (The CD player will not stop)

8. The source selector will return to the previous source, CD, when

the desired programme is finished.

By main unit

1. To change the mode of JOG control M to RDS mode, press the

TUNER button E until “RDS MODE” is displayed and press the

ENTER button M of JOG control . Turn the JOG control until the

display indicates “EON SEEK” and press the ENTER button M.

2. The EON SEEK starts to scan, and will stop scanning when the

tuner receives a station which has EON information.

The “EON” indicator lights up. To advance to the next EON station

with the EON flag, press the ENTER button M again within 5

seconds.

3. After the above procedure, press the NEWS/TA button until the

display shows the desired programme, NEWS or TA.

4. The display will show the desired program name (NEWS or TA).

5. Change to the source you desire, for example CD, and play a CD.

6. The source will change automatically to tuner when the desired

programme for EON information is detected. The NEWS or TA

segment indicator blinks at this time. (The CD player will not stop.)

7. The source selector will return to the previous source, for example

CD, when the desired programme has finished.

CT (CLOCK TIME) IN RDS

The CT is clock time information from the RDS. This data can be

copied to the present time by the CPU (microprocessor).

You can also turn this feature ON or OFF, and select a preset station

when it is set to ON position. (The initial preset station is M01)

For detail of this feature, please refer to page 16, SPECIAL

FUNCTIONS.

1. To display the RDS clock time, press the DISPLAY button J/m.

Note:

When the RDS clock time is displayed, please check the local time

in your country.

PRESENT TIME SETTING

Operation using the main unit

The initial clock display is “0:00”. To operate the timer program, you

must set the present time.

The following shows as an example how to set the time as 13:30, or

1:30 PM.

1. Press the DISPLAY button J except when ”TUNER” is shown.

The display changes to clock time.

2. Press the MEMORY button G. The hour digit blinks in the display.

3. Turn the JOG control M to set the digits displayed to the left of the

colon to “13”, or “1”.

Press the ENTER button of JOG control M, to set the hour digits

have been set. Then minute digit starts blinking.

4. Turn the JOG control M to set the digits displayed in the minutes

to “30”.

5. Press the MEMORY button G to set the clock. The clock now

starts.

Note:

The 12-hour system can be set through the SPECIAL FUNCTION

menu. Please refer page 16.

CORRECTING THE TIME

The displayed time can be corrected simply if it is done near the “00”

minute of an hour.

The following example shows the displayed time, 13:58, is to be

corrected to 14:00.

1. To change the display mode to clock, press the DISPLAY button

J. The display indicates the clock.

2. Press the MEMORY button G for more than 3 seconds.

3. All digits start to blink.

4. Press the MEMORY button G to set the clock. The display

changes to “14:00”.

Note:

The displayed hour does not change if the minute figures displayed

are between 00 and 29. If they are between 30 and 59, the

displayed hour increases by one. (e.g: 12:29 → 12:00, 13:58 →

14:00)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Marantz DR2100 Guide de l'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Marantz DR2100