Marantz SR5004 Manuel d'utilisateur télécharger pdf (Page 48)

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

ADVANCED

OPERATION

ENGLISH

ADVANCED OPERATION

2. Press INFO button on the remote

controller.

3. The list of preset channels will be displayed

on the screen of the TV monitor connected

to this unit.

PRESET LIST

NO. 1 FM 87.10 MHz

NO. 2 FM 93.10 MHz

NO. 3 FM 94.70 MHz

NO.10 FM105.70 MHz

RETURN NEXT EXIT

4. Up to 10 channels can be displayed at a

time. If there are more than 10 channels,

press INFO on the remote controller once

more to display the next page.

In a few moments the list display is cleared

automatically.

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory

using the following procedure.

3.2.

1. Recall the preset number to be cleared

with the method described in “Recalling” a

preset station.

2. Press the MEMORY button on the front

panel or press the MEMO button on the

remote controller.

3. The stored preset number blinks in the

display for 5 seconds. While blinking, press

the CLEAR button on the front panel or the

CLR button on the remote controller.

4. “xx CLEAR” appears on the display to

indicate that the speciﬁ ed preset number

has been cleared.

Note

• To clear all stored preset stations, press and hold

the T.MODE and the ENTER buttons for two

seconds.

SORTING PRESET STATIONS

If you have stations memorized, and there is a gap

in the sequential order:

I.e. the stations are stored as follows

1) 87.1 MHz

2) 93.1 MHz

3) 94.7 MHz

10) 105.9 MHz

(notice there is no stations programmed for pre sets

for 4-9), you can have pre set 10 become pre set 4:

To sort the numbers, press and hold the MEMORY

and the 4 cursor buttons.

“PRESET SORT” will appear on the display and

sorting will be done.

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel

to be entered using alphanumeric characters.

Before name inputting, you need to store preset

stations with the preset memory operation.

2. 5. 6.5.4.

1. Recall the preset number to be inputted

name with the method described in

“Recalling” a preset station.

2. Press the MEMORY button on the front

panel or press the MEMO button on the

remote controller for more than 3 seconds.

3. The left most column of the station name

indicator ﬂ ashes, indicating the character

entry ready status.

4. When you press the 3 or 4 cursor buttons

on the front panel or the remote controller,

alphabetic and numeric characters will be

displayed in the following order:

A ↔ B ↔ C ... Z ↔ 1 ↔ 2 ↔ 3 ..... 0 ↔ – ↔ +

↔ / ↔ (Blank) ↔ A

UP ↔

↔ DOWN

5. After selecting the first character to be

entered, press the MEMORY or ENTER

button, or press the MEMO button on the

remote controller.

The entry in this column is ﬁ xed and the

next column starts to ﬂ ash. Fill the next

column the same way.

To move back and forth between the

characters, press the 1 / 2 cursor buttons.

Note

• Unused columns should be filled by entering

blanks.

6. To save the name, press the MEMORY or

ENTER button on the front panel, or press

the MEMO button on the remote controller

for more than 2 seconds.

Instead of using the 3 and 4 cursor

buttons to select characters, characters

can be input from the numeric keys of the

remote controller. See the below table for

a correspondence between characters and

numeric keys.

Numeric

keypad

Display

A → B → C → 1 → A

D → E → F → 2 → D

G → H → I → 3 → G

J → K → L → 4 → J

M → N → O → 5 → M

P → Q → R → 6 → P

S → T → U → 7 → S

V → W → X → 8 → V

Y → Z → space → 9 → Y

– → + → / → 0 → –

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Marantz SR5004 Manuel d'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Marantz SR5004